Nokia (S60)

This description is based on the E70. Other models may differ.

We presume that you already have downloaded and installed the public certificate of your Certificate Authority (CA).

First you have to navigate to the access point configuration menu.

From the main menu, select Tools.

Select Settings

Select Connection

Select Access points

Now have entered the access point configuration menu. Here you will see a list of already defined access points or empty if you have none.

Press Options, then New access point and Use default settings

This opens a new wireless profile configuration

Set Connection name to anything you like, here it is eduroam

Set Data bearer to Wireless LAN

Set WLAN netw. name to eduroam

Further down, make sure Network status is set to Public

WLAN netw. mode should be Infrastructure.

WLAN security mode must be WPA/WPA2

Even further down you can set Homepage to your own preference or None

Select Options while highlighting WLAN security sett.

This opens WPA/WPA2 configuration.

Set WPA mode to EAP

Set TKIP encryption to Allowed

Finally select Options while highlighting EAP plug-in settings

This opens EAP configuration

Ask your network administrator for what EAP type to use and disable all other EAP types. EAP-PEAP, EAP-TTLS and/or EAP-TLS are the most common types used.

In this example only EAP-PEAP is selected.

Highlight EAP-PEAP and select Options.

This opens the EAP-PEAP configuration. It has several tabs. The first one is General.

User certificate should be left as (not defined)

Ask your network administrator for what CA certificate to use. It could be a private CA in which case you will have to install it first (Run the certificate file from the File Manager)

User name in use should be User-configured

Further down, User name is your user name without a suffix (realm)

Realm in use must be User-configured

Realm must be defined for your eduroam profile to work outside of your own organisation. Ask your administrator for the correct realm.

The last settings under General are PEAP versions. Select Yes for all of them.

Go to the second tab, EAP

Deselect all except EAP-MSCHAPv2

Select Options to configure MS-CHAPv2 settings.

User name should be your user name without a suffix/realm.

Promt password can be set to No if you like

Enter your password in the Password field.

When you are finished, select Back

The last tab is Cipher

Leave everything at it's default settings: Everything selected.

Select Back until you find your profile in the list of profiles.

Your profile should now be ready for use by your applications.